Windows 10 black screen cursor after update free download
This tutorial contains instructions to fix the following issue: Windows 10 won’t load correctly and shows only a black screen with cursor after installing updates. Description of black screen problem at system logon in Windows 10 : After updating Windows 10, the system restarts to install the updates. When the installation is completed and after typing the password at the login screen, the screen goes black and only the mouse cursor appears. The unexpected black screen problem in Windows 10, can be occur for several reasons, so this troubleshooting guide, contains several methods to resolve the problem.
The first solution, to fix the “Black screen with cursor” issue, on Windows 10 startup, is to completely shutdown your PC and restart. Press and Hold down the Power button for seconds, to fully shutdown your PC. Disconnect everything from your computer, including the power cord.
If you ‘re using a laptop, also remove the battery. Put back the Power cord and the battery and connect only any other device that needed e. Keyboard, Mouse, Monitor. The second method to bypass the “black screen with cursor” issue on Windows 10, is to force open Windows explorer, by using the task manager:.
Click ‘ Task Manager ‘. Finally press the ” 4 ” key or the ” F4 ” in order to start Windows in Safe Mode. Then apply the below steps and solutions.
Apply the instructions from this tutorial to enable the ” Advanced Boot Options ” menu. Then restart your computer and press the “F8” key to start Windows in Safe Mode. Type explorer. Leave your system for minutes, to see if Windows loads the desktop and the icons. Then search and install all available Windows updates and restart your system again to ensure that the “black screen” issue is resolved.
The next solution that commonly fixes the Windows 10 black screen issue at system logon, is to disable the “AppReadiness” service. To do that:. Then from the ‘ File ‘ menu select ‘Run new task ‘. Type services. In the list of Services, locate and double-click to launch the ‘AppReadiness’ service’s properties. Type msconfig and click OK. At ‘Services’ tab, check the ‘Hide all Microsoft services’ checkbox. Click the Disable All button and then click OK. Restart your computer.
After restart and if Windows boots to desktop normally, run the “System Configuration” msconfig utility again and enable one by one the disabled services and restart your system, in order to find out which one causes the “black screen after login” issue.
Expand Display Adapters. Right click on the installed display adapter and select Uninstall device. Check the Delete the driver software for this device checkbox and click Uninstall. After uninstall, reboot the computer and let Windows to reinstall the drivers for the display adapter.
If Windows cannot find the driver for the display adapter, then navigate to the VGA’s manufacturer support site, to download and install the needed driver manually. Type an account name e. User1 and a password if you want and click Next and Finish. At ‘User Accounts’ main window, select the new user and click Properties.
Select the Group Membership tab. Place a dot at Administrator and click OK twice to exit. Sign-in using the new account. If you can enter to the desktop, proceed and transfer all your files from your old account to the new one.
If the above methods, doesn’t help you, then try to restore your system to a previous working state. Type the following command and press Enter to launch ‘System Restore’. Click Next at the first screen. Select a previous restore point and click Next again. Follow the onscreen instructions to start the restore process. After System Restore, proceed and update all device drivers on your system, before updating Windows Another method that usually can fix many problems in Windows 10, is to repair Windows with an in-place upgrade.
For that task follow the detailed instructions at this article: How to repair Windows 10 with an in-place upgrade. Many times, it is better and less time consuming to backup your files and to RESET your PC or to perform a clean Windows 10 installation , than to try to resolve problems in Windows That’s it!
Which method worked for you? Let me know if this guide has helped you by leaving your comment about your experience. Please like and share this guide to help others. We’re looking for part-time or full-time technical writers to join our team!
It’s about a remote position that qualified tech writers from anywhere in the world can apply. Click here for more details. How to , Tutotial. Terry June 30, pm. Peter Rigg October 6, pm. Very time consuming but worth it in the end, Many Thanks.
Rizki September 25, am. Gal September 1, pm. OMG you saved me. Besides gaming Im also working in my pc and you are my hero. Thanks alot solution 2 worked for me. Matt July 28, am. Sergio March 13, am. Your email address will not be published. Skip to content Menu. FIX: Windows 10 Black Screen with Cursor issue, after Update Solved This tutorial contains instructions to fix the following issue: Windows 10 won’t load correctly and shows only a black screen with cursor after installing updates.
Solution 1. Force shutdown and restart your PC. Solution 2. Open Windows Explorer using Task Manager. Solution 3. Disable the ‘AppReadiness’ service. Solution 4. Uninstall the Display Drivers. Solution 6. Add a new user account to Windows Solution 7. Restore Windows 10 to a previous state.
Solution 8. Repair Windows 10 with an in-place Upgrade. Solution 9. Perform a Clean Windows 10 installation. So: 1. Power On your computer. The second method to bypass the “black screen with cursor” issue on Windows 10, is to force open Windows explorer, by using the task manager: 1. Disable the ‘App Readiness’ service.
To do that: 1. Restart your PC. Solution 5. Type devmgmt. Type the following command and press Enter. Click the Add button to create a new account. Select Sign in without a Microsoft account. Choose Local account at the next screen.
Windows 10 Black Screen With Cursor [Solved] | 2019.Windows 10 black screen cursor after update free download
Nov 19, · Black screen (with cursor) after Windows updates Hello all, Display Driver Uninstaller Download version Display Driver Uninstaller: How to use – Windows 7 Help Forums NVIDIA I recently updated to Windows 10 and now have a black screen no cursor. I did check in the forum and that seems to be a common issue. Description of black screen problem at system logon in Windows After updating Windows 10, the system restarts to install the updates. When the installation is completed and after typing the password at the login screen, the screen goes black and only the mouse cursor appears. Jun 24, · If the USB hardware is still attached to the computer after the update, it may prompt the PC to cause some graphics issues resulting in the black screen. It is wise to unplug all the USB equipment once you see the blank display and restart the computer. You are free to replug the external devices once the screen gets fixed. 3. Jan 27, · After installing the update and logging in I was faces with the black screen+cursor. I let it sit overnight to see if anything would change. When I woke up windows had brought up a pop-up thanking me for downloading the latest update. Everything else was still black. I clicked “Close” and I was back with the black screen+cursor. Jun 01, · Black screen issue on Windows 10 usually occurs after an upgrade or when an automated Windows Update installs updates on your system. Since this black screen is most likely a hardware (GPU) problem we will need to assess and troubleshoot various settings to diagnose and fix it. Black Screen With Cursor.
Windows 10 black screen cursor after update free download.Black Screen With No Cursor After Windows 10 Install
This can be annoying on the least and frustrating in most cases. More and more of this issue has been reported recently among Windows 10 users. There are many possible reasons why you may be having this problem, but the most common cause is your user shell being corrupted either by some malware, applications, or system updates.
The user shell manages various windows explorer functions like the taskbar, the desktop, and other user interface features. The first method is more suitable if you suspect that this problem could be due to certain malware changing the value data of your user shell, so to fix that you need to manually correct the value data of your user shell.
Here select task manager from the list. In a moment you should see the task manager page pop up, here click on the file menu and select run new task. You should see a dialog box like this asking for the name of the program, document, or window you want to open.
You should then see your registry editor page pop up. That should open up a number of other subfolders underneath it, you can click on this little arrow next to each folder to expand it. In the same manner, expand the folders in the following order. At this point you should have a bunch of files on the right side of the screen.
Here you want to look for the file named shell. These files are arranged alphabetically so you want to scroll down to the s category, and there you should see the shell. In the field under the value data, you want to ensure it says explorer. This is usually the value that certain malware gets to change into some other executable file that it would have saved somewhere on your computer, and this could be the reason why you may not see your desktop and other GUI functions.
Also if you notice any unusual icons or images on your desktop after installing some application, then this could also be a solution for you. So here you want to ensure that your value data is explorer.
Then click ok to save the change. Close the registry editor, and also close the task manger. On the bottom right corner, you should see the power icon, click on it and select restart to reboot your computer.
This could take some additional time, so you might see the restart taking longer than usual, but that is ok. Upon restarting, you should be able to log back in and access your desktop and other GUI functions as usual. Here we will be using the troubleshooting tool from advanced startup option to either revert back to the previous version of windows or boot to safe mode and uninstall the application that could be causing this error.
On the bottom-right corner of the screen, you will see the power icon. Press and hold down the shift key and then select restart from the power options, keep holding the shift key until you see the advanced startup option page. Here you get to decide which option is more suitable in your case. If this black screen error occurred after you installed some major updates, say you upgraded from Windows 10 build to build , then you can select the option that says go back to the previous version , and then follow the instructions to revert to your previous build, and that could possibly fix your black screen problem.
But if you suspect that this could be coming from an application you recently installed then you want to boot to safe mode and uninstall or modify the application from there. To do that you want to click on startup settings on the page below. Wait a bit for the startup settings page to come up. Here you can see the option 4 that says enable safe mode. To select it you need to press F4 or the number 4 on your keyboard and then wait for your computer to boot into safe mode. Wait a bit for the page to open up.
Here you can see a list of all the programs you have currently installed on your computer. From here you can check for the program you suspect might be causing the problem, then click on it and select uninstall to remove it. Then you should have your programs listed in the order of the date of installation, so from here you can locate the most recent installations. Afterwards you can restart your PC to boot back into normal mode, and hopefully your black screen error gets resolved.
Please share your comments, questions and feedback in the comment section below. The following video demonstrates the solutions in this tutorial. My registry is on explorer. Please, what should I do? Facebook 0 Tweet 0 Pin 0 LinkedIn 0. More Windows 10 Resources:. Leave a Reply Cancel reply Your email address will not be published. Comment Name Email Website.
Black Screen With Cursor After Windows Update.Windows 10 black screen cursor after update free download
But there are several fixes that you can use to fix this issue of the black screen with only cursor. This issue of Windows 10 screen going black with the only cursor can happen for various reasons.
It can be a result of Graphic card failure or the failure of connections under your display. But most of the time it happens due to the malfunctioning of some program or software installed on your Windows. There are programs that interfere with the Start-up process of your Windows, and sometimes an error in them can restrict the proper bootup for your Windows.
There are various methods to fix Windows 10 black screen with cursor issue. Follow any of the below-elaborated methods and see if it helps you in getting rid of the issue. Windows 10 comes with an extremely useful feature “Fast Startup”. But in terms of achieving the fast bootup, it restricts your Windows from winding-up properly at the time you are shutting your System down. This puts your Windows 10 at risk of various kinds of malfunctioning possibilities, and one of those is Windows 10 black screen with the cursor.
If you know that the Windows 10 black screen with cursor issue is occurring due to the Fast Startup feature, then turning off the Fast Startup might help.
Step 2. Go to “Control Panel” from search results and choose “Small icons” under the “View by” sorting command. Step 3. Now, look for “Power Options” and click on it. Now, under the “Power Options” window, on the right-hand panel, you will see a “choose what power buttons do” option, click on it. Step 4. On the new window, under “Define power buttons…. Step 5. You will be now able to access “Shutdown settings” below on the same window. Under the “Shutdown setting” look for “Turn on Fast Startup recommended ” option.
You will see the Fast Startup enabled, uncheck the option to disable Fast Startup. Step 6. Once you have unchecked the “Turn on Fast Startup” option, click on the “Save” button at the bottom of the window. After completing the process, shut-down your Windows PC and try to restart it again in normal mode. Graphics Card in your Windows PC is the one component that deals with most of the screen related tasks.
Slightest of the problem in your Graphic card can cause various errors in your display, including the issue of the black screen without a cursor. Thus, updating, disabling, or reinstalling of the Graphic card might help you. Go to the search — panel on Task Bar and search for “Device Manager”. Click on Device Manager from the results to access the Device Manager window.
On the Device Managers window, look for the “Display Adapters” option. Now, left-click on the Graphic card you want to take actions on, and choose from the options Update, Disable, or Uninstall, as per your requirement. BIOS in your Windows 10 system is one of the most important software.
It is a Basic Input and Output System and is used by your computer’s microprocessor. Choose where you want to search below Search Search the Community. Search the community and support articles Windows Windows 10 Search Community member. I don’t know what to do. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse.
Details required :. Cancel Submit. Previous Next. John Vil Microsoft Agent. To better assist you and provide you with the appropriate troubleshooting steps, kindly answer the questions below: Are you able to see the sign in screen and login?
Are you able to see the Start menu, task bar, and your desktop icons? Have you tried performing any troubleshooting steps? We’ll be looking forward for your response. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. I just have a black screen with a flashing cursor in the top left corner. There is no response to anything I press. I do not know any trouble shooting tip. My computer restarted and I was now stuck on a blue screen with the loading icon the circle of dots in the center of the screen.
I waited about an hour for it to boot past this screen and nothing happened. I forced my computer off then turned it back on. From here I was finally given the option to “Reset” my PC I’ve been to the Recovery Screen many times the past few weeks and it has never shown up. My computer restarted itself and startes to reinstall windows. Fast forward 2 hours and my computer is now up to date and working perfectly! I’m just in the process of re-downloading all of my programs.
Was this reply helpful? Yes No. Sorry this didn’t help. Thanks for your feedback. Choose where you want to search below Search Search the Community. Search the community and support articles Windows Windows 10 Search Community member. Hello all. But if i try to open task manager it goes back to the black screen – tried booting in safe mode i still only get the black screen. I have the same question Report abuse.